Then, connect the Apple device cable to the cable which is now plugged into your P125, via the USB connection. As you look at the back of the P125, all the relevant ports are on the right-hand side, with the USB-to-host port being the leftmost one. Step 2: Take the USB type A to type B cable, and plug it into the USB-to-host port in your P125 via the square-type connector. ![]() Once you have the cables you need, you are ready to connect your device. Unfortunately, the P125 does not include either of these cables in the box, but they are all readily available from amazon. The second cable you will need in order to connect to the piano is a USB type B, to a USB type A, as shown below. If however, you use an older device with the wider, 30-pin power input, then you will instead need a 30-pin to female USB cable, as shown below. This may also be referred to as a lightning to camera USB cable. If you have a newer Apple device, which uses the thin, lightning power input, then the first cable you need is a Lightning to female USB cable, as shown below. To put it into simple terms, two cables are required, one which goes directly into your device, and another which goes directly into the piano. ![]() Step 1: The main thing which confuses users are the cables initially required to physically connect the device to the piano, as the way it is described on the app is rather baffling.
0 Comments
Leave a Reply. |